Tapping machine - Hoporo Machinery

M6-M12 Fully automatic intelligent four-axis tapping machine

1. When the rear discharge door of this machine is opened, the spindle will not be able to start. This is to prevent the operator from getting injured during abnormal startup. 2. This machine has an abnormal alarm prompt. The fault code will be displayed on the touch screen, facilitating the operator's troubleshooting. 3. This machine is equipped with torque monitoring and nut status monitoring. 4. This machine is equipped with two sets of oil sludge separators. They can effectively separate the tap oil and waste chips, preventing the waste chips from entering the oil tank and avoiding the wear of the tap and the deterioration of the surface finish of the nuts. 5. This machine is equipped with a defective product sorting mechanism. When there is abnormal torque, the number of nuts set at the front and rear of this mechanism will not stop and will flow into the defective product transfer box continuously. (The rear discharge of this machine is equipped with two independent discharge outlets and one defective product discharge outlet.)

Image recognition screening press machine

Nut threading machine and pressing machine 1

Nut threading machine and pressing machine

M14-M20 Fully automatic four-axis standard tapping machine

M6-M12 Special-shaped nut fully automatic four-axis tapping machine

M6-M12 Fully automatic four-axis standard tapping machine

Two axis tapping machine with outer frame

Two axis tapping machine without outer frame

Single spindle tapping machine without frame

Single axis tapping machine with outer frame